Changing The Device Name - Conrad GX107 Mode D'emploi

Changing the Device Name

If you operate several "GX107" devices at the same time, we recommend assigning each
device its own name. This way, you can allocate alarm messages to the right device.
To change the name of your "GX107" device, send the following SMS command:
SET NAME <new name> #1513
Example: Renaming the "GX107" to "NEWNAME"
SET NAME NEWNAME #1513
You will receive the following confirmation SMS:
NEWNAME 1.xx
- - - - - - - - -
...
...

The maximum length of the device name is 15 characters.
For resetting the default settings ("GX107"), send the following command:
RESET NAME #1513
All manuals and user guides at all-guides.com
67