Conrad GX107 Mode D'emploi page 65

Recording Telephone Numbers
Up to 6 phone numbers can be programmed into the "GX107".
In case of an alarm, a notification SMS can be sent to these phone numbers. In addition to that,
only these phone numbers are accepted for the INCALL function.

If the same phone number is in the list several times, it will receive the same
SMS that many times, too.
Send the corresponding SMS command to the "GX107".
SET TEL1 +49111... #1513
SET TEL2 +49111... #1513
SET TEL3 +49111... #1513
SET TEL4 +49111... #1513
SET TEL5 +49111... #1513
SET TEL6 +49111... #1513
The "GX107" offers a way to programme several phone numbers in one command. For
example:
To programme 3 phone numbers (TEL1 to TEL3):
SET TEL1 +49111... +49111... + 49111... #1513
To programme 6 phone numbers (TEL1 to TEL6):
SET TEL1 +49111... +49111...+49111... +49111... +49111... +49111... #1513
After sending the "SET TEL..." command, you will receive an SMS response with a list of the
recorded phone numbers
GX107 1.xx
- - - - - - - - - - -
TEL1
+49111...
TEL2
+49222...
TEL3
+49333...
..... Etc. ...
All manuals and user guides at all-guides.com
65