Playing Music Using The Cable - SilverCrest SBL 44 A1 Mode D'emploi

All manuals and user guides at all-guides.com
BB58  %OXHWRRWK /DXWVSUHFKHUB%ERRN 6HLWH  'LHQVWDJ  -DQXDU    

7.3 Playing music using the cable

NOTE: if there is a device connected via a cable,
this connection has priority over the Bluetooth con-
nection. A possibly existing Bluetooth connection
will be interrupted. Phone calls can still be made
wireless.
1. Plug the TRS connector of the 3.5 mm stereo
jack cable|13 into the headphone socket of
the sound source (e.g. MP3 player, telephone)
and the socket AUX|6 on the device.
2. Switch on the sound source.
3. Press the button fII|10 for approx. 4 seconds
to switch on the device. An acoustic signal
sounds.
4. Press PLAY on the sound source. The sound is
reproduced via the speakers|5.
5. Set the volume on the sound source to the max-
imum level and adjust the volume on the de-
vice using the buttons
song must be chosen via the sound source.
‹- ›
+
|11 / |9. The
GB
73