SilverCrest SBL 44 A1 Mode D'emploi page 72

All manuals and user guides at all-guides.com
BB58  %OXHWRRWK /DXWVSUHFKHUB%ERRN 6HLWH  'LHQVWDJ  -DQXDU    
1. If necessary, remove the plug of the 3.5 mm ste-
reo jack cable|13 from the socket AUX|6.
2. Push and keep the button pressed fII|10 until
the Bluetooth connection indicator|1 flashes
blue. An acoustic signal sounds.
3. Switch on the audio device (e.g. smartphone)
and start the Bluetooth connection. The audio
device will now receive the device identifica-
tion "SBL|44|A1".
4. Establish a connection to the Bluetooth outdoor
speaker on the audio device. Both devices are
now interconnected. The LED on the device is
lit blue and an acoustic signal sounds.
NOTE: it is possible that audio devices remember
the identification of the device. Thus it is possible
that a new manual connection establishment is not
required while the Bluetooth function is active.
5. Now play a song on the audio device. The
sound is reproduced via the speakers|5.
70
GB