Fitting The Support Feet; Installation Site Requirements; Controls - SilverCrest SLB 1.2 B2 Mode D'emploi

Fitting the support feet

♦ Slide the support feet
behind
GB
Fig. 1

Installation site requirements

For safe and trouble-free operation of the device, the installation site
must fulfi l the following requirements:
■ The device must be placed on a fi rm, fl at and level surface.
■ Do not place the device in a hot, wet or extremely moist environ-
ment or in the vicinity of fl ammable materials.
■ Place the device so that it is not exposed to direct sunlight, strong
artifi cial light or heated air.

Controls

2
3
4
5
6
7
8
9
30
7
(see fi g. 1).
6
6
LIGHT switch (ON / OFF)
TREBLE switch (ON / OFF)
BASS switch (ON / OFF)
Rotary switch (on/off and volume control)
Headphone socket (3.5 mm jack plug)
Loudspeaker
Support foot
Loudspeaker cable with 3.5 mm jack plug
Power supply cable with USB plug
onto the loudspeaker guide rails from
7
SLB 1.2 B2