Turning Key Click On/Off; Selecting A Base Unit; Automatic Selection; Manual Selection - Topcom Butler 1200C Mode D'emploi

HANDL. B1200C/1210C
Butler 1200C/1210C
• The current status of the keypad appears on the display:
- 'LOCK': the keypad is locked
- 'UNLOCK': the keypad is not locked
• Press the Up or Down key
• Press the Programming key

4.20 Turning key click on/off

You can set the telephone to make a sound whenever you press a key.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• The current status appears on the display:
- 'CLICK ON': turn on key click
- 'CLICK OFF': turn off key click
• Press the Up or Down key
• Press the Programming key

4.21 Selecting a base unit

If your handset is subscribed to several base unit stations (max. 4) , you must select a base unit
because the handset can only communicate with one base unit at a time. There are two possibilities:

4.21.1 Automatic selection

If you set the handset to 'automatic selection', the handset will automatically choose the closest
base unit in standby.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'SEARCHING' and the symbol
• A signal sounds once the handset has found a base unit.

4.21.2 Manual selection

If you set the handset to 'manual selection', the handset will only choose the base unit you
have set.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
All manuals and user guides at all-guides.com
30-03-2001 08:32
to make your selection.
to confirm your selection.
.
repeatedly until 'KEY SETUP' appears on the display.
.
repeatedly until 'KEY CLICK' appears on the display.
.
to make your selection.
to confirm your selection.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BASE SEL' appears on the display.
.
repeatedly until 'AUTO' appears on the display.
.
appear on the display.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BASE SEL' appears on the display.
59
Page 59