Changing The Drive Belt - HOLZMANN MASCHINEN D 460FXL Mode D'emploi

14.2

Changing the drive belt

1. Lightly screw Allen screw
2. Lift the engine to belt tensioning device
Pull standoff right and unscrew the Allen screw
with pulley
HOLZMANN MASCHINEN GmbH
1.
2.
Allen screw
www.holzmann-maschinen.at
Allen screw
Redirecting the machine to 90° before starting
1. Unscrew the cover belt
2. Secure the drive shaft left with pen or Allen
wrench and unscrew the handwheel.
ATTENTION: Lefthand thread !
Tap out with soft hammer the drive shaft
carefully out of the bearing seat left
DANGER: be sure which side of the encoder
disk of the lock ring is inserted.
left and right to be.
The retaining ring is only used as shim!
MAINTENANCE
Handwheel
Can both the
28
D 460FXL