Important; General Safety Instructions - Bosch Sensixx B22L Notice D'utilisation

en
Thank you for buying the Sensixx B22L steam
station, the new steammironing system from Bosch.
Carefully read through the operating instructions for
the appliance and safeguard them for future referm m
ence.
Introduction
These instructions for use contain valuable information
about the unique features of this system and some hints
to make ironing easier for you.
We hope that you enjoy ironing with this steam station.

Important

Open out the first page of the booklet, this will help you to
understand how the appliance works.
This appliance complies with international safety
standards.
This appliance has been designed exclusively for
domestic use and must not be used for industrial
purposes.
This appliance must be used only for the purposes for
which it was designed, i.e. as an iron. Any other use will
be considered improper and consequently dangerous.
The manufacturer will not be held responsible for any
damage arising from misuse or improper use.
General safety instructions
• This appliance is to be connected and used in
accordance with the information stated on its
characteristics plate.
• This appliance must be connected to an earthed
socket. If it is absolutely necessary to use an extension
cable, make sure that it is suitable for 16A and has a
socket with an earth connection.
• The iron should not be used if it has been dropped,
if there are visible signs of damage or if it is leaking
water. It must be checked by an authorized Technical
Service Centre before it can be used again.
• If the safety fuse fitted in the appliance blows, the
appliance will be rendered inoperative. To restore
normal operation the appliance will have to be taken
to an authorised Technical Service Centre.
• In order to avoid that, under unfavourable mains
conditions, phenomena like transient voltage drops or
lighting fluctuations can happen, it is recommended
that the iron is connected to a power supply system
with a maximum impedance of 0.27 Ω . If necessary,
the user can ask the public power supply company for
the system impedance at the interface point.
• This appliance is not intended to be used by persons
(including children) with reduced physical, sensory
or mental capacities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• Remove the plug from the socket before filling
the appliance with water or before pouring out the
remaining water after use.
10
All manuals and user guides at all-guides.com
• The appliance must never be placed directly under the
• The appliance must be used and placed on a stable
• When placed on its stand, make sure that the surface
• The iron must not be left unattended while it is
• Unplug the appliance from the mains supply after
• The electrical plug must not be removed from the
• Never immerse the iron or steam tank in water or any
• Do not leave the appliance exposed to weather
• With the aim of avoiding dangerous situations, any
Important :
• This appliance reaches high temperatures and
• The steam hose, base station, metal plate at the
• Never aim the steam at people or animals.
• Do not allow the power cable to come into contact with
• Be aware that the system can keep on steaming for a
Description
1. Water tank
2. Removable iron pad
3. Steam hose storage fixing
4. "Calc'n'Clean Advanced" scale collector *
5. Mains cable storage compartment
6. Mains cable
7. Steam hose
8. "Energy Saving" button *
9. "Steam ready" / "Auto shutsoff" pilot light
10. Variable steam control *
11. "Refill water tank" / "Clean warning" pilot light
12. Illuminated main power button (0/I)
13. Iron fixation system "SecureLock"
14. Housing with internal steam generator
15. Temperature control knob
16. Steam release button
17. Steam shot button "Pulse steam" *
18. Iron pilot light
19. Soleplate
20. Fabricsprotection soleplate cover*.
tap to fill the water tank.
surface.
on which the stand is placed is stable.
connected to the supply mains.
each use, or if a fault is suspected.
socket by pulling the cable.
other fluid.
conditions (rain, sun, frost, etc.).
work or repair that the appliance may need, e.g.
replacing a faulty mains cable, must only be carried out
by qualified personnel from an Authorised Technical
Service Centre.
produces steam during use, this could cause scalds
or burns in case of improper use.
bottom of the removable iron pad (2) and in particular
the iron can get hot when used. This is normal.
the soleplate when it is hot.
short additional time after releasing the steam trigger.
This is a normal function.
* Model dependent