Troubleshooting - Klarstein TRINITYCOOK HYBRID Mode D'emploi

EN
36

TROUBLESHOOTING

Note: If there are any disruptions in the device operation and the display will show
an error code check with the table below if the problem can be solved before you
contact the manufacturer or customer service.
Error code Possible cause
E0 There is no cookware on the hob
or the cookware is not suitable.
E1 The appliance heats up
extensively (due to e.g. covered
ventilation slots).
Appliance parts are damaged
(e.g. the transistor).
E2 The overheating protection is on
and appliance will switch off.
E3 Short lasting power cut.
Possible solution
Place the appropriate cookware
with food on the hob.
Clear the ventilation slots.
Let the appliance cool down for
a few minutes. Afterwards the
appliance is ready for operation.
If the error code is displayed
when the appliance has cooled
down, contact customer service.
Contact customer service.
Pull the plug from the socket.
Remove the cookware from the
hob.
Let the appliance cool down for a
few minutes. Afterwards insert the
plug into the socket and restart
the appliance.
Pull the plug from the socket.
After a
few minutes, plug in the
appliance again.
Have the power supply checked
by an electrician.