Safety; Intended Use - WIKA TFS135 Mode D'emploi

2. Safety

2. Safety
EN

2.1 Intended use

The model TFS135 bimetal temperature switches are used to limit
temperatures within a wide variety of industries.
The TFS135 are temperature limiting instruments. They are not
intended to provide any safety or protective functionality.
They monitor the temperature of machinery and equipment during
normal operation and, for example, switch off machinery if it
overheats.
The instrument has been designed and built solely for the intended
use described here, and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the bimetal
temperature switch outside of its technical specifications requires the
instrument to be taken out of service immediately and inspected by
an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
6
All manuals and user guides at all-guides.com
WARNING!
Before installation, commissioning and operation, ensure
that the appropriate switch has been selected in terms
of switching temperature, design and specific measuring
conditions.
Non-observance can result in serious injury and/or
damage to the equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.
WIKA operating instructions model TFS135