Features - Ryobi P205 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Chuck .......................................................... 3/8 in. Keyless
Motor ..................................................................... 18 V DC
Switch ..........................................................Variable Speed
Keyless
ChuCK
(sCrew holder/BiT
kNOW yOUR DRILL-DRIVER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCk)
Your drill has a direction of rotation (forward/reverse/center
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the direction of rotation
selector in the OFF (center lock) position helps reduce the
possibility of accidental starting when not in use.
kEyLESS CHUCk
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.

FEATURES

Torque
AdjusTmenT ring
swiTCh
Trigger
mAg TrAy
™
sTorAge)
No Load Speed .......................0-350/0-1,300 r/min. (RPM)
Clutch.................................................................24 position
Torque ................................................................... 330 in.lb.
MAG TRAy
™
The magnetic tray conveniently stores bits and screws or
other small parts.
TORQUE ADJUSTMENT RING
Your drill has a 24-position clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
TWO-SPEED GEAR TRAIN
The two-speed gear train is designed for drilling or driving
at LO (1) or HI (2) speeds. A slide switch is located on top
of your drill for selecting either LO (1) or HI (2) speed.
VARIABLE SPEED
The switch trigger delivers higher speed with increased
trigger pressure and lower speed with decreased trigger
pressure.
 − English
leVel
Two-sPeed
geAr TrAin (hi-lo)
direCTion oF
roTATion seleCTor
(ForwArd/reVerse
/CenTer loCK)
Fig. 1