Water Fill - Aircare CM330A Mode D'emploi

ASSEMBLY
Unpack humidifier from carton. Remove all
packaging materials, wick, etc. from box.
1) For shipping purposes, the fill float has
been taped inside the base.
2) Remove the tape and insert the fill float
tube into the cylinder at the front right
corner of the unit.

WATER FILL

CAUTION: Before filling, ensure unit is
turned OFF.
This unit has a low water indicator in the
corner of the fill grill.
1) To fill the reservoir, carefully pour water
into the sloped portion of the front grill.
2) Base capacity is 1.6 gallons. DO NOT OVERFILL.
FILL HERE
Under no circumstances should you use Water Treatment products intended for Rotobelt
or Ultrasonic humidifiers.
Fan Speed Knob
Humidity Control Knob
Chassis
Fan Knob
Humidity Control Knob
Chassis
Chassis
Chassis
Wick
Float
Parts and accessories may be ordered by calling 1-800-547-3888, or visit
www.essickair.com or www.AIRCAREproducts.com. Please have model number
of humidifier available when ordering.
CAUTION: If water spills
on the chassis, it must be allowed to dry completely
before turning on the humidifier. If you have only
softened water available in your home, you can use it, but
you will notice a build-up of minerals on the evaporative
wicks much sooner.
NOTE: We recommend using AIRCARE
Bacteriostat Treatment when you refill the water reservoir to
eliminate bacterial growth. Add bacteriostat according to the
instructions on the bottle.
Replacement Parts Available For Purchase
Description
CM330A WHT (white - analog)
CM330A BLK (black - analog)
CM330D WHT (white - digital))
CM330D BLK (black - digital)
COMMON
4
®
or Essick Air
Part Number
1B72798F
1B72798H
1B72871
1B72794F
1B72794H
1B72872
1B72873
1B72874
SGL1040
1B72796
REMOVE TAPE
SECURING FILL
INDICATOR
INSERT FILL
FLOAT INTO
CYLINDER
®