Assembling The Precise Heat Mixing Bowl; Before First Use; Attaching The Precise Heat Mixing Bowl To Stand Mixer; Bowl-Lift Stand Mixer - KitchenAid KSM1CB Instructions

ASSEMBLING THE PRECISE HEAT MIXING BOWL

Before first use

Before using your Precise Heat Mixing Bowl
for the first time, wash the stainless steel
bowl liner, lid, and stir accessory, soapy
water, then rinse with clean water and dry.
Do not use abrasive cleaners or scouring
pads.
NOTE: These parts can also be washed
in the top rack of the dishwasher.
Attaching the Pr_ecise Heat Mixing Bowl to Stand Mixer_
The Precise Heat Mixing Bowl can either be used by itself, or attached to a KitchenAid
Stand Mixer with the lid removed. Before attaching the Precise Heat Mixing Bowl to a
Stand Mixer decide how to attach it by determining which model Stand Mixer you have.

Bowl-Lift Stand Mixer_

Use the handles to attach the Precise Heat Mixing Bowl to the Stand Mixer.
Be sure the Stand Mixer's speed control
1
is OFF and Stand Mixer and Precise Heat
Mixing Bowl are both unplugged.
Fit the handles on the Stand Mixer bowl
3
support arms, and press down on the
back of the Precise Heat Mixing Bowl
to snap it into the bowl-lift.
8
The Precise Heat Mixing Bowl can either be
used by itself, or attached to a KitchenAid
Stand Mixer with the lid removed. When
using the Precise Heat Mixing Bowl alone,
see the "Using the Precise Heat Mixing
Bowl" section.
NOTE: When using the Precise Heat
Mixing Bowl by itself, place it on a flat,
level surface.
Place the bowl-lift lever on the Stand
2
Mixer in the down position.
If desired, attach the appropriate
4
accessory for your recipe. Then rotate
the Stand Mixer bowl-lift lever back in
the up position.
®
®