Basic Operation; Radio Mode - SOUNDMASTER DAB150 Mode D'emploi

DAB150 / English Instruction Manual

BASIC OPERATION

The radio is powered by the built-in lithium battery. A USB cable is supplied in the product
package.
Charging battery
You can check the level of battery power remains on the radio. When the radio is playing, press
the "INFO/SLEEP" button repeatedly until you see the battery indicator on the bottom right of the
display .
Getting started
Press the " /MODE" button to power on the unit.
To power off the radio, press and hold the same button.
Volume Control
Press the VOL- or VOL+ button to decrease or increase the volume.

RADIO MODE

Change radio mode
When the radio is power on, press the "
/MODE" button to select the mode between DAB and
FM.
DAB station scan
The first time you power on the radio, it will scan the DAB radio stations automatically. It will
display and play the first station after the scan is done.
In case it displays "No DAB Service", press and hold the "SCAN/PRESET" button until the unit
starts scanning.
Tune DAB station
Press the CH- or CH+ button to choose other radio channels. Release the button when it
displays the station you want to play and it will start playing automatically.
FM scan
Change to FM mode by pressing the " /MODE" button. Press and hold the "SCAN/PRESET"
button and the unit will start the scan. It will scan to the next available station.
To manual scan, use the CH- or CH+ button. And it will fine tune the frequency in a step of
50kHz.
Preset
Press the "SCAN/PRESET" button and it will display "Preset 1 unset". Choose the number of
preset by CH- or CH+ button where you want to save the station. Then press and hold the
"ENTER" button until the unit shows "Saved".
To recall the preset station, press the "SCAN/PRESET" button shortly and use the CH- or CH+
button to navigate. At least press "ENTER" button to confirm.
2