Balluff BTL7-S5-M-A/B/Y/Z-NEX-S32/KA Serie Notice D'utilisation page 37

BTL7-S5 _ _ (B)-M _ _ _ _ -A/B/CD/Y/Z(8)-NEX-S32/KA _ _
Micropulse Transducer - Rod Style
3
Construction and function
BTL7-...-KA_ _
Ø max. 7
Version D1
...-B-...
...-Z-...
10.2 mm
...-A-...
...-Y-...
...-B8-...
...-Z8-...
8 mm
...-A8-...
...-Y8-...
...-CD-... 12.7 mm
Fig. 3-1: BTL7-...-A/B/CD/Y/Z(8)-... transducer, construction and function
3.1 Construction
Electrical connection: The electrical connection is made
via a cable or a connector (see Type code on page 24).
Housing: Aluminum housing containing the processing
electronics.
Mounting thread: We recommend assembling these
transducers on the mounting thread:
– BTL7-...-A/B: M18×1.5
– BTL7-...-Y/Z: 3/4"-16UNF
– BTL7-...-CD: M22×1.5
The transducers with Ø 10.2 mm and 12.7 mm have an
additional thread at the end of the rod to support larger
nominal lengths.
Magnet: Defines the position to be measured on the
waveguide. Magnets are available in various models and
must be ordered separately (see Accessories on page 22).
www.balluff.com
Mounting surface
N
1)
BTL7-...-S32
O
A
G A
0.5 mm Ø 25 mm
M4×4/6
0
0.5 mm Ø 25 mm
-
0
M4×4/6 0.5 mm Ø 31 mm
Damping zone
Nominal length =
Measuring range
2)
Magnet
M
1) Unusable area
2) Not included in scope of delivery
M N
M18×1.5 30 −1 mm
3/4"-16UNF 2" −0.04"
M18×1.5 30 −1 mm
3/4"-16UNF 2" −0.04"
M18×1.5 30 −1 mm
3/4"-16UNF 2" −0.04"
M18×1.5 30 −1 mm
3/4"-16UNF 2" −0.04"
M22×1.5 30 −1 mm
Nominal length: Defines the available measuring range.
Rods with various nominal lengths from 25 mm to
5500 mm are available depending on the version:
– Ø 10.2 mm: Nominal length from 25 mm to 5500 mm
– Ø 8 mm: Nominal length from 25 mm to 1016 mm
– Ø 12.7 mm: Nominal length from 25 mm to 2000 mm
Damping zone: Area at the end of the rod that cannot be
used for measurements, but which may be passed over.
Ignition protection
"ec" and "tb"
1)
O
15.4×2.1
15.3×2.4
15.4×2.1
15.3×2.4
15.4×2.1
15.3×2.4
15.4×2.1
15.3×2.4
19.3×2.2
english 9