Acoustic Signals; Options - Electrolux ESL4500LO Notice D'utilisation

Masquer les pouces Voir aussi pour ESL4500LO:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10
www.electrolux.com
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting.
activated.
deactivated.
3. Press
4. Press the on/off button to confirm the
setting.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you have
selected non compatible
options, the appliance will
automatically deactivate one
or more of them. Only the
indicators of the options still
active will stay on.
All manuals and user guides at all-guides.com
and
until
,
and
start to
.
and
go off.
continues to
= rinse aid dispenser
= rinse aid dispenser
to change the setting.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
,
flash and the display is blank.
2. Press
.
• The indicators
• The indicator
flash.
• The display shows the current
setting:
= Acoustic signal off.
= Acoustic signal on.
3. Press
to change the setting.
4. Press the on/off button to confirm the
setting.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
This option deactivates the release of salt.
The salt indicator does not come on.
With the use of this option the programme
duration is prolonged to increase the
cleaning and drying results with the use of
multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
and
until
and
start to
and
go off.
continues to

Publicité

Table des Matières
loading

Table des Matières