Acoustic Signals; Options - Electrolux ESF5532LOW Notice D'utilisation

32 www.electrolux.com
How to deactivate the rinse aid
empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and Start
until the indicators
the display is blank.
2. Press Option.
• The indicators
off.
• The indicator
continues to flash.
• The display shows the current
setting.
–
notification activated.
–
notification deactivated.
3. Press Option to change the setting.
4. Press the on/off button to confirm the
setting.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
All manuals and user guides at all-guides.com
,
and start to flash and
and
= rinse aid empty
= rinse aid empty
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
go
1. To enter the user mode press and
hold simultaneously Delay and Start
until the indicators
the display is blank.
2. Press Delay
• The indicators
• The indicator
flash.
• The display shows the current
setting:
–
–
3. Press Delay to change the setting.
4. Press the on/off button to confirm the
setting.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
programmes, water consumption and the
last rinse temperature can be affected.
The option XtraDry is not a permanent
option and must be selected at every
cycle.
How to activate XtraDry
Press Option until the indicator
comes on.
,
and start to flash and
and
go off.
continues to
= Acoustic signal off.
= Acoustic signal on.