Acoustic Signals - Electrolux ESL 8320RA Notice D'utilisation

30 www.electrolux.com
• The indicators
• The indicator
• The display shows the current
3. Press
the setting.
4. Press the on/off button to confirm the
setting.
6.4 Use of rinse aid and multi-
tablets
The factory setting of the rinse aid
dispenser is with the dispenser activated.
This means that the rinse aid dispenser
always releases rinse aid.
It is possible to deactivate the rinse aid
dispenser, in this case the dispenser will
not release rinse aid only if the option
Multitab is activated.
If the dispenser is deactivated and you do
not select the option Multitab, the
dispenser will release rinse aid.
The use of the option Multitab with the
rinse aid dispenser deactivated may not
give satisfying drying results.
When the rinse aid dispenser is
deactivated, the rinse aid indicator is
always off when the option Multitab is
activated.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
,
off.
continues to
flash.
setting: e.g. = level 4.
– The levels of rinse aid are from
0A to 6A.
– Level 0 = no rinse aid is
released.
again and again to change
, ,
.
,
off.
and go
3. Press
deactivated.
4. Press the on/off button to confirm the
6.5 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
You can also set applicable options
together with the programme.
2. Press and hold
How to set the MyFavourite
programme
Press

6.6 Acoustic signals

Acoustic signals sound when a
and until
malfunction of the appliance occurs. It is
and
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
and go
completed. By default this acoustic signal
• The indicator
flash.
• The display shows the current
setting: = the rinse aid
dispenser is activated (factory
setting).
to change the setting.
= the rinse aid dispenser is
setting.
save
until the related
indicator comes on with fixed light.
.
• The MyFavourite indicator comes
on.
• The display shows the number and
the duration of the programme.
• If options have been saved
together with the programme, the
indicators related to the options
come on.
continues to