Functional Description; Technical Data - Bosch GSR 12 VE-2 PROFESSIONAL Instructions D'emploi

All manuals and user guides at all-guides.com
OBJ_DOKU-3423-001.fm Page 8 Wednesday, September 20, 2006 8:36 AM
Hold the power tool only by the insulated
gripping surfaces, when performing an opera-
tion where the cutting tool may run into hid-
den wiring. Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock the
operator.
Hold the power tool with a firm grip. High reac-
tion torque can briefly occur while driving in and
loosening screws.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions, unfold the
graphics page for the tool and leave it open.
Intended Use
GSR 12 VE-2 / GSR 14,4 VE-2 / GSR 18 VE-2:
The tool is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plas-
tic.
GSB 12 VE-2 / GSB 14,4 VE-2 / GSB 18 VE-2:
The tool is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plas-
tic and for impact drilling in brick, brickwork and stone.

Technical Data

Cordless Screwdriver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screwdriving
application according to ISO 5393
Max. screw dia.
Max. drilling dia.
– Steel
– Wood
Chuck clamping range
Drill spindle
Weight according to EPTA-Procedure
01/2003
Technical data determined with 2.6 Ah NiMH HD battery.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may vary.
8 | English
Product Features
The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1 Keyless chuck
2 Torque preselection ring
3 Gear selection lever
4 Soft grip ("Comfort Zone")
5 Operating mode preselection ring (GSB 12 VE-2 /
GSB 14,4 VE-2 / GSB 18 VE-2)
6 Auxiliary handle (GSR 18 VE-2 / GSB 18 VE-2)
7 Battery release button
8 Battery*
9 Screwdriver bit*
10 Rotational direction switch
11 On/Off switch
12 Auxiliary handle clamping band
13 Universal bit holder*
14 Securing screw for keyless chuck
15 Hex key**
16 Brush holder
17 Cover lid
*The accessories illustrated or described are not
included as standard delivery.
**Commercially available (not included in the delivery
scope)
GSR 12 VE-2 GSR 14,4 VE-2
PROFESSIONAL PROFESSIONAL
3 601 J93 K.. 3 601 J93 H..
V= 12
rpm 0–430
rpm 0–1650
Nm 67/28
mm 8
mm 13
mm 40
mm 1.5–13
½"
kg 2.4
GSR 18 VE-2
PROFESSIONAL
3 601 J93 F..
14.4 18
0–450 0–470
0–1720 0–1800
72/30 82/38
10 12
13 13
45 50
1.5–13 1.5–13
½" ½"
2.5 2.7
2 609 932 518 • 20.9.06