SilverCrest SAR 28 A1 Mode D'emploi page 109

Handling and use
Further settings using the SEL button (EQ/LD/TA/AF)
♦ Hold down the SEL
the SEL button until the required function is shown on the display.
♦ Turn the multi-controller
played.
TA - Enabling / disabling Traffi c Announcement (traffi c information)
TA ON: If TA mode is enabled, the device immediately switches from other sta-
tions or operating modes to the radio station that is currently transmitting traffi c
information.
NOTE
► When the TA function is enabled, you can only search for or save stations
that are transmitting traffi c information. Stations that are transmitting traffi c
information signals are denoted in the display by TP.
TA OFF: The TA function is disabled.
AF - Enabling / disabling Alternative Frequencies
AF ON: When the AF function is enabled, the device searches for the current
station's optimum frequency.
AF OFF: The AF function is disabled.
EQ - Equaliser
Turn the multi-controller to select one of the FLAT, CLASSIC, ROCK, POP or
♦
EQ OFF settings. No equaliser is enabled if EQ OFF is set. The equaliser
setting is shown at the bottom of the display.
SUBW - Subwoofer
You can connect an active external subwoofer to produce a more powerful bass
eff ect.
Turn the multi-controller to enable the bass eff ect (SUBW ON) or disable it
♦
(SUBW OFF).
AVOL - Set the volume when radio is switched on
♦ Turn the multi-controller to set the volume level used when the radio is turned on.
SAR 28 A1
All manuals and user guides at all-guides.com
button for about 2 seconds and then keep pressing
18
to change the settings of the menu item dis-
17
GB
105