Other Functions; Locking The Remote Controller Buttons (Operation Function Limit Controller) - Mitsubishi Electric CITY MULTI PLFY-P VBM-E Serie Manuel D'utilisation

6. Timer
<Checking the Current Auto Off Timer Setting>
TIMER
AFTER
1. Be sure that the "Auto Off" is visible on the screen (at
2. Hold down the Timer Menu button
is indicated on the screen (at
• The timer remaining to shutdown appears at
3. To close the monitor and return to the standard control screen, press
the Mode (Return) button .
<To Turn Off the Auto Off Timer>
Hold down the Timer On/Off button
Off" appears (at ) and the timer value (at
°C

7. Other Functions

7.1. Locking the Remote Controller Buttons (Operation
function limit controller)
If you wish, you can lock the remote controller buttons. You can use
the Function Selection of remote controller to select which type of lock
to use. (For information about selecting the lock type, see section 8,
item [4]–2 (1)).
Specifically, you can use either of the following two lock types.
Lock All Buttons:
Locks all of the buttons on the remote controller.
Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Locked" indicator appears on the screen to indicate that buttons are
currently locked.
TIME SUN
°C
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
12
Timer Setting
OFF
AUTO OFF
).
for  seconds so that "Monitor"
).
.
for  seconds so that "Timer
) disappears.
°C
AUTO OFF
Locked Indicator
FUNCTION
°C
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
Alternatively, turn off the air conditioner itself. The timer value (at
will disappear from the screen.
<To Turn On the Auto Off Timer>
Hold down the Timer On/Off button
indication disappears (at ), and the timer setting comes on the dis-
play (at ).
Alternatively, turn on the air conditioner. The timer value will appear at
.
<How to Lock the Buttons>
1. While holding down the Filter button
OFF button for 2 seconds. The "Locked" indication appears on the
screen (at ), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote control-
ler, the screen will display the "Not Available" message when you
press the buttons as described above.
°C
• If you press a locked button, the "Locked" indication (at
on the display.
°C
<How to Unlock the Buttons>
1. While holding down the Filter button
OFF button for 2 seconds so that the "Locked" indication disappears
from the screen (at ).
°C
AUTO OFF
for  seconds. The "Timer Off"
AFTER OFF
°C
°C
AUTO OFF
, press and hold down the ON/
FUNCTION
°C
) will blink
FUNCTION
°C
, press and hold down the ON/
°C
)