Routine Control And Maintenance Operations And Safety Checks; Periodical Maintenance Checks - RCM Brava 1000 HT Notice D'utilisation Et Entretien

Routine control and maintenance operations
1) The motor-sweeper must be inspected by a skilled technician who checks its safety or for any damage or defects in the
following cases:
 before it is put into operation
 after modifications or repairs
 at regular intervals, as indicated in the "Routine maintenance and control operations" table.
2) Every six months check that the safety devices are in good working order.
To ensure that the safety devices are operating properly, the machine must be overhauled by specialist staff every 5 years.
3) The person in charge of the machine must make an annual check on its condition. During this check, he must decide
whether the motor-sweeper still complies with the technical safety regulations, and then apply a marker plate to the
machine to indicate that the check has been made.

Periodical maintenance checks

1 Check oil level
2 Check engine air filter
3 Check belts
4 Replace engine oil
5 Check that the main brush is free fom wires, strings, etc.
6 Check dust filter
7 Replace dust filter
8 Check main and side brushes trace width
and safety checks
Intervals in hours
8 40 150 500







37
1500
