Publicité
Les langues disponibles
Les langues disponibles
D.S.C. RECORDING
26
EN
Basic Shooting (D.S.C. Snapshot)
You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are
stored in the memory card.
NOTE:
Before continuing, perform the procedures listed
below:
●
Power (
pg. 13)
●
Loading a Memory Card (
VIDEO/
MEMORY
1
Remove the lens cap.
2
Open the LCD monitor fully. (
3
Set the VIDEO/MEMORY Switch to
"MEMORY".
4
Set the Power Switch to "REC" while pressing
down the Lock Button located on the switch.
●
To change the Picture Quality,
5
Press SNAPSHOT. The "PHOTO " indication
appears while the snapshot is being taken.
●
To delete unwanted still images, refer to "Deleting
(
Files".
pg. 29)
●
When you do not want to hear the shutter sound,
set "MELODY" to "OFF". (
NOTE:
If shooting is not performed for approx. 5 minutes
when the Power Switch is set to
is supplied from the battery pack, the camcorder
shuts off automatically to save power. To perform
shooting again, push back and pull out the
viewfinder again or close and re-open the LCD
monitor.
pg. 18)
SNAPSHOT
Lock Button
Power Switch
pg. 19)
pg. 31, 34.
pg. 31, 33)
"REC"
and power
Approximate Number of Storable Images
●
The number increases or decreases depending
on the Picture Quality/Image Size, etc.
Image Size/Picture
Quality
640 x 480/FINE
640 x 480/STANDARD
Image Size/Picture
Quality
640 x 480/FINE
640 x 480/STANDARD
SD Memory Card
8 MB 16 MB 32 MB 64 MB
47
95
205
425
160
295
625 1285
MultiMediaCard
8 MB
16 MB 32 MB
55
105
215
190
320
645
Publicité
