DeVilbiss Healthcare SleepCube DV51 Mode D'emploi page 19

Appareil de ventilation spontanée en pression positive
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
Display Example
Enable Menu
Press 
LCD Contrast Adj
50 %
Compliance Meter
123456.7 hours
Hourmeter
HD123456
Firmware Version
V0.19 21/08/2009
Serial Number
HD123456
Adherence Score
83% (25/30)
SmartCode
1FF-FFFF-FWJ
SmartCode
Z7G-7QFM-NWK
NOTE- If the unlocked symbol is shown, you are able to adjust this setting. If the locked symbol is shown, this setting can
only be adjusted by your provider.
SE-DV51-1
Description
Pressing the down key enters the Enable menu. Refer to next section for Enable
Menu details.
This setting changes the contrast for the LCD display. This only needs to be adjusted
if you find it difficult to see the display from your viewing angle.
The total number of hours (in 1/10 hour increments) that the device has been
providing therapy.
The total number of hours (in 1/10 hour increments) that the device has been in
operation.
Shows version of installed firmware.
Shows the serial number of the device.
Shows the maximum adherence achieved for any period of thirty consecutive days of
use within a ninety-day time frame. The score represents the percentage of days,
within thirty consecutive days, where usage met or exceeded the 'Usage Threshold.'
SmartCode is used for therapy management reporting. Therapy information is
encoded in a series of letters and numbers and includes a special character for error
checking to ensure accuracy. Use the UP arrow or DOWN arrow keys to change the
SmartCode reporting period.
Usage
EN - 19

Publicité

Table des Matières
loading

Table des Matières