DeVilbiss Healthcare SleepCube DV51 Mode D'emploi page 17

ADVANCED MENU CONTROLS
With the device on, press the "Next" or "Previous" buttons on the keypad to scroll through the items on the display.
Name
PREVIOUS ITEM
NEXT ITEM
SETTING CHANGE
Please note that the values displayed are examples only.
Patient Menu Layout
The following charts show, by Mode, each Display you will scroll through using the Next or Previous buttons on the
keypad. Pressing the Down key at the Enable Menu Display will allow you to enter this submenu. Then use Next or
Previous buttons to scroll through it and press the Up button to return to main menu. Once the final Display is reached,
pressing the Next button will return you to the first Display.
NOTE-If the unlocked symbol is shown, you are able to adjust this setting. If the locked symbol is shown, this setting can
only be adjusted by your provider.
CPAP Mode
P:10.0 CPAP
Heat:5
Set Pressure
10.0 cmH20
Delay Time
10 minutes
Delay Pressure
5.0 cmH20
Enable Menu
Press 
LCD Contrast Adj
50%
Compliance Meter
123456.7 hours
Hourmeter
123456.7 hours
Firmware Version
V0.13 21/08/2009
Serial Number
ID123456
Adherence Score
83% (25/30)
SmartCode 1-Day
1FF-FFFF-FWJ
SE-DV51-1
Symbol Function
k
Pressing this button displays the previous menu option.
j
Pressing this button displays the next menu option.
h�
These buttons allow you to adjust the setting that is shown on the display.
i

Auto-OFF
Enabled
Auto-ON
Enabled
Low Backlight
Enabled
Exit Menu
Press 
NOTE: There are 5 levels of SmartCode data. Use UP 
or DOWN  key to change between levels.


EN - 17