Automatismos Pujol Mini Marathon Instructions De Montage Et De Réglage page 37

PHOTOCELL CONNECTION ON OPENING
Microswitch 4: OFF
6 7 8
PHOTOCELL CONNECTION WITH TEST
1 2 3 4 5 6 7
PHOTOCELL CONNECTION EMITTER/RECEIVER
1 2 3 4 5
1 2
Photocell
Transmitter
INTERNAL / EXTERNAL RADIO SELECTION
The main panel can operate with either the incorporated radio
or with an external card if the radio devices are incompatible.
INTERNAL RADIO
Memorising the emitter code. To memorise the emitter codes, the control panel must be in a stable situation,
with the door in the opened or closed position.
a) Manual Memorising.To memorise the code press the PROG EMITTER programming pushbutton for 1.5
seconds. The red LED lights up and an audible tone can be heard, when the pushbutton is released the LED
remains on, indicating that the system is ready to memorise the emitter code. From this moment, any
received code will be memorised. For this, we will press the emitters with the function that we want to
activate the automation. The memorisation will be confirmed via a flash of the red LED and an audible tone.
The system automatically exits the memorisation mode 10 seconds after having received the last code. This
is indicated by the red LED turning off and two short audible tones.
mini marathon
9 10 11 12 13
8 9 10 11
1
2
3
4
on
5
6 7 8 9 10 11
3 1 2 3
Photocell Receiver
automatismos pujol - 37 - english
RESISTIVE BAND CONNECTION
Microswitch 4: ON
6 7 8
Light beam
off
MAIN PANEL
TERMINAL
10. 0v
11. 12v DC
8. TEST
5.
Common C.S.
4. C. SEG
4 5 6
9 10 11 12 13
8,2 K
CONNECTION DIAGRAM
Photocell Terminal Main Panel Terminal
1. (12/24v) 0
2. (12/24v) +
3. TEST
4. POSITION
5. POSITION
CONNECTION DIAGRAM
Photocell Photocell
Transmitter Receiver
1
2 2
1
4
6
Internal External
Internal / External Radio Selection
10. 0v
11. 12v DC
8. TEST
5. Common C.S.
4. C. SEG