Setting The Temperature Control - Avantgarde AWC168S Manuel D'utilisation

Recommended Temperatures for Chilling Wine
Red Wines:
Dry/White Wines
Sparkling Wines
The above temperatures may vary slightly depending on whether or not the interior bulb is ON or
OFF or whether the bottles are located on the upper/middle or lower section .

SETTING THE TEMPERATURE CONTROL

ach cooling compartment of the wine Cooler (upper & lower) is independently controlled. To set the
E
temperature: Connect the power cord to a properly grounded outlet. In the event of a power
interruption, all previous temperature settings are automatically saved and each compartment will
keep the previous temperature setting. The temperature preset at the factory is 5° C for the upper
compartment at the factory and 12° C for the lower compartment.
First choose the area to adjust (upper or lower zone ). To set the desired cooling temperature of the
upper zone press the
a second time to set the temperature for the lower zone.
Each depression of the push button will scroll through the available temperature settings (for each
compartment) in increments of 1 degree. The temperature selected will flash on the LED display for
approximately 5 seconds, then will revert back and display the temperature inside the cabinet.
UPPER COMPARTMENT
he temperature setting can be adjusted from 5° C to 10° C (40° F to 50° F).
T
LOWER COMPARTMENT
he temperature setting can be adjusted from 10° C to 18° C (50° F to 65° F).
T
To view the "set" temperature press and hold the corresponding push button for approximately
5 seconds, the "set" temperature will temporarily "flash" in the LED display for 5 seconds.
15-18° C (58-65° F)
9-15° C (48-58° F)
5-9° C (40-48° F)
button then adjust the temperature using
，
or Press the
.
button