Reversing The Door - Avantgarde vinopazzo LBWC27SS Manuel D'utilisation

REVERSING THE DOOR

CAUTION: UNPLUG THE APPAPREIL BEFORE STARTING THIS PROCESS
IMPORTANT: this operation requires at least 2 persons.

LOWER RIGHT HAND HINGE/AXIS

SCREW AND PLATE

DOOR

TOP RIGHT HINGE/AXIS

TOP LEFT HINGE /AXIS

DECORATIVE NAILS

LOWER LEFT HINGE/AXIS
INSTRUCTIONS
1. Open the door at a 90 degree angle, take out 2 screws from lower door axis (2), and
remove the axis plate and door.
2. Set the door aside in a safe place and unscrew the 3 screws from top right hinge (4) and
take out the right top hinge.
3. Remove the decorative nails (8) from left top of cabinet and install the spare top left hinge
(9) at left top of cabinet using the 3 screws.
4. Rotate the door 180 degrees, then re-installed it the same way it was removed making
sure it is aligned properly (9)
5. Block the hole at right top of cabinet with the spare decorative nails.
25