Temperature Control & Display; Temperature Setting & Lights - Avantgarde LBWC-42SD Manuel D'utilisation

To turn OFF the cellar, unlock the control panel then press the
Temperature Control and Display
1. When the unit is plugged in all of the display and indicators will light for 3 seconds and an audible
beep will be heard.
2. The temperatures in left zone and right zone can be independently controlled and displayed.
3. The temperature in either zone can be controlled between 39° F to 65°F (4°C to 18°C). (The zone
temperature may have a tolerance of +/-5° F (+/-3°C) from setting depending on different loading
and ambient conditions.)
Indicators Lights
When lit, the
•
adjustment can be made to that zone.
When lit, the
•
(compressor is running). The
Note: The light will remain on and the compressor may continue to run for several
minutes after the desired temperature is reached.
Lock and Unlock
The lock feature is designed to prevent the settings of your wine cooler from being adjusted
accidentally. In order to adjust any of the settings you must unlock the control panel by pressing the
"lock" pad for approximately 3 seconds. Once the unit is unlocked an audible beep will be heard and the
"lock" indicator light will go out.
If no selection is made to adjust the unit in approximately one minute the control panel will automatically
return to the "lock" mode.
To lock the unit manually press the
Temperature setting
• Unlock the control panel by pressing the
panel is unlocked an audible beep will be heard and the
• Under normal conditions the temperature display indicates the current temperature of the
corresponding zone. When adjusting the temperature, the temperature display will flash to
indicate that the temperature is being adjusted.
• The temperature in both left zone and right zone can be set independently by pressing
(warmer) or
zones can be set between 39° F to 65° F (4°C to 18°C) +/- 3°C. (+/-5° F)
• When the pad
or decrease in an increment of one degree. If the pad
and held for 2 seconds, the temperature displayed will increase or decrease in a speed of one
degree per half second.
• Once you have adjusted the left or right zone to the desired temperature, release the
temperature pad. At this time the temperature displayed will flash for approximately 3 seconds
to confirm the selected temperature. Once the display stops flashing the temperature display
will indicate the current temperature of that zone.
Note:
The temperature display can be changed between Celsius and Fahrenheit by simultaneously
indicator light indicates that all of the control pads are locked and no
indicator light indicates that the corresponding zone is in the refrigeration cycle
indicator will go off once the desired temperature is reached.
"lock" pad.
(colder) pads that correspond to desired zone. The temperature range of both
(warmer) or (colder) is pressed, the temperature displayed will increase
button and hold 2 seconds.
pad for approximately 3 seconds. Once the control
indicator will go out.
(warmer) or (colder) is pressed
19