Chopin Infraneo Installation Rapide Et Premier Test page 4

C. Start the test
A. Select the product to be analyzed from the drop-
down menu in the main window of the application.
B. Click on ''Analyze''.
C. Name the sample.
D. Press ''Measure''.
To change or remove the sliding cell, click on
''Unlock sliding cell'.
D. Print the results
If a printer is connected and enabled (left USB port on the front panel), the results
are automatically printed at the end of the analysis.
Click on to enable printing.
Click on to disable it.
E. Export the results
It is possible to manually export the results at the end
of the analysis:
A. Select the analyses to export by clicking the
corresponding boxes in the first column (or select
all the tests by clicking on ''All'').
B. Click on ''Export results''.
C. Enter the name of the file in which the results will be
exported.
D. Connect a USB stick to a USB port of the front
panel (other than the printer port).
E. If necessary, select the location on the stick where
the exported file is to be saved and click on ''OK''.
The file copied on the stick with a .csv extension
is compatible with a spreadsheet program such as
TM
Excel .
TURN OFF THE INFRANEO
A. Press the ''Exit'' button to stop the application.
B. Press ''Start/Stop'' in the operating system to turn
off the screen.
C. Power off the Infraneo device using the I/O switch
located at the rear of the device.
It is recommended to switch off the device
every day.
A
B
Click on to enable
C
zoom mode.
D
Click on to return to the
standard display.
A
B
C
D
E
Program shutdown
the