GE GFWS1705 Guide De L'utilisateur Et Instructions D'installation page 4

IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
PROPER INSTALLATION
This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
Ensure that the hot water hose is connected to the "H" (internal red screened) valve and the cold water hose
is connected to the "C" (internal blue screened) valve.
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather, which
could cause permanent damage and invalidate the warranty.
Properly ground washer to conform with all governing codes and ordinances. Follow details in the Installation
Instructions.
Ensure washer is properly leveled and washer legs are adjusted such that unit is stable.
This washer may not include water supply hoses.
GE Appliances strongly recommends the use of factory specified parts. A list of factory hoses available for
purchase are listed below. These hoses are manufactured and tested to meet GE Appliances specifications.
GE Appliances strongly recommends the use of new water supply hoses. Hoses degrade over time and need
to be replaced every 5 years to reduce the risk of hose failures and water damage.
WHEN NOT IN USE
Turn off water faucets to minimize leakage if a break or rupture should occur. Check the condition of the fill
hoses; GE Appliances recommends changing the hoses every 5 years.
PARTS AND ACCESSORIES
Order on-line at GEApplianceparts.com today,
24 hours a day or by phone at 800.626.2002 during
normal business hours. In Canada, visit your local
GE Appliances parts distributor or call 800.661.1616.
READ AND SAVE THESE INSTRUCTIONS
4
Part Number Accessory
PM14X10002 4 ft rubber water supply hoses
Or
PM14X10005 4 ft braided water supply hoses
WX10X10208 Washer Magic
Cleaner
PM7X1 Washer Floor Tray
PM7X2 Low Profile Universal Washer Floor
Tray (For use with pedestal models)
SBSD137HWW 27" White Pedestal
SBSC137HDG 27" Diamond Grey Pedestal
Washing Machine
®
49-90583-1