Scope Of Use; Safety Instructions And Symbols Used; Machine Layout And Items Supplied - EINHELL HSP 41/1 Mode D'emploi

Anleitung HSP41-1_HSP51_SPK1
Packaging
The device is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
When using the equipment, a few safety
precautions must be observed to avoid injuries
and damage.
Read the operating instructions carefully and
comply with them. It is important to consult these
instructions in order to acquaint yourself with the
unit, its proper use and safety regulations.
Keep this manual in a safe place, so that the
information is available at all times.
If you give the equipment to any other person,
hand over these operating instructions as well.
We cannot accept any liability for damage or
accidents which arise due to a failure to follow
these instructions.

1. Scope of use

The wood splitter is designed for splitting pieces of
wood with maximum lengths of 370 mm (HSP 41/1) /
520 mm (HSP 51) and diameters of 50 – 250 mm.
2. Safety instructions and symbols
used
The applicable safety instructions and explanations
of the symbols on the device are set out in the
enclosed booklet.

3. Machine layout and items supplied

(Fig. 1-3)
1. Splitter
2. Trunk guidance panels
3. Trunk pusher
4. Guard handle
5. Hand guard
6. Wheels
7. Motor
8. Front support legs
9. Transportation handle
10. Main frame
11. Operating handles
12. Six screws size M6 x 16
13. One screw size M6 x 25
14.09.2006 18:51 Uhr Seite 13
14. Seven washers size M6
15. Five nuts size M6
16. Two circlips size M6
4. Assembly (see Fig. 4-18)
Important! Never use the machine if it is not fully
assembled.
5. Technical data of the HSP 41/1
Voltage: 230 V 50 Hz
Power rating:
Idle speed:
Insulation class:
Protection type:
Max. splitting force:
Splitting lift:
Trunk holding capacity:
Diameter: 50 - 250 mm
Max. length:
Oil quantity:
Weight:
L noise level:
pA
Technical data of the HSP 51
Voltage: 230 V 50 Hz
Power rating:
Idle speed:
Insulation class:
Protection type:
Max. splitting force:
Splitting lift:
Trunk holding capacity:
Diameter: 50 - 250 mm
Max. length:
Oil quantity:
Weight:
L noise level:
pA
GB
1500 W
2950 rpm
B
IP 54
4 t
280 mm
370 mm
2.4 l
42 kg
65 dB(A)
1500 W
2950 rpm
B
IP 54
5 t
370 mm
520 mm
3.2 l
45 kg
65 dB(A)
13