Intended Use - EINHELL BT-LS 44 Mode D'emploi D'origine

Anleitung_BT_LS_44_SPK1:_
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout and items supplied (Fig. 1-3)
1. Splitter
2. Trunk guidance panels
3. Trunk pusher
4. Ventilation screw
5. Hand guard
6. Wheels
7. Motor
8. Front support legs
9. Transport handle
10. Main frame
11. Operating handle
12. 2x Screws size M6 x 12
13. 2x Screws size M6 x 20
14. 4 x Spring washer size M6
15. 4 x Washer size M6
16. 2 x Cap nut size M10
17. 2 x Stop nut size M10
18. 2 x Spring washer size M10
19. 4 x Washer size M10
14
06.07.2010 10:26 Uhr Seite 14

3. Intended use

The wood splitter is designed for splitting wood with a
maximum length of 370 mm and a diameter of 50 to
250 mm.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Voltage:
Power rating:
Idle speed:
Insulation class:
Protection type:
Max. splitting force:
Splitting lift:
Splitting speed:
Trunk holding capacity:
Diameter:
Max. length:
Oil quantity:
Weight:
L noise level:
pA
5. Before putting the equipment into
operation (see Figures 4-16)
Important. Never use the equipment if it is not fully
assembled.
230 V 50 Hz
1500 W S2 20 min
2950 rpm
B
IP 54
4 t
310 mm
0,035 m/sec
50 - 250 mm
370 mm
2.4 l
40 kg
65 dB(A)