Ordering Replacement Parts; Disposal And Recycling; Storage And Transport - EINHELL BT-LS 44 Mode D'emploi D'origine

Anleitung_BT_LS_44_SPK1:_
7.2.3 Motor circuit breaker switch (Fig. 18/ Item B)
If the motor is overloaded for a longer period the
motor circuit breaker switch will shut off the power
supply automatically.
This can be reset by pressing it in after waiting
approximately 1 minute. The wood splitter will then
be ready for use again.

7.3 Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

8. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.

9. Storage and transport

Use, transport and store the equipment only in a
horizontal position as shown in Fig. 1. Store the
equipment and accessories out of children's reach in
a dark and dry place at above freezing temperature.
The ideal storage temperature is between 5 and 30
°C.
06.07.2010 10:26 Uhr Seite 17
GB
17