To Modify Identification Texts - Videotec KEYPLUS Manuel D'instructions

Description
Select all the steps and modify them according to the
procedure described: all the disabled ones have dwell
time value set to 0 seconds.
C
Press to exit.
Save changes, and modify each desired sequence
according to the procedure described above.
Exit from the main menu pressing

To modify identification texts

The SW164 Std Matrix can identify each single video input with a text of max 24 characters, used respectively
during the normal sequence and in case of alarm.
Text definitions
Description
Select ID text from the menu using
U D
and .
Get into the menu by pressing
Select alarm or normal text modification using
U D P
/ , confirm with
Select the number of the text to be modified;
1
to delete and type the new text
0
to modify the existing text
C
to delete the last character of the text
The current character is displayed on the left: [C].
To add it to the text press
U
To change it press
When the change is complete, confirm the exit with
P
Save and eventually proceed with the modification of
the other Identification Texts following the above
instructions
Exit from the main menu pressing
C
.
E
E
.
D
or .
C
Keys
C
1 0
/
C
Keys
U D
E
U D E
[ ]
3 E
1 0
/
UD C E
[ ]
P
C
C
Page 18
Display
Save changes?
[1] Yes [0] No
SEQUENCE 1.
User #1,Day £
MATRIX SETUP
1.Sequence £
Display
MATRIX SETUP
2. ID Texts ¢
TEXT CHANGES 2.
ID Text £
ID TEXT. 2.1
Change text # __
Erase old setup?
[1] Yes [0] No
T03:¥N ENTRANCE_
[A]¢ ¤ Clr Prg
T03:MAIN ENTRA_
[C]¢ ¤ Clr Prg
Save changes?
[1] Yes [0] No
MATRIX SETUP
2.ID Texts ¢
KEYPLUS9702