Enabling Input And Output Selection And Keys; Password Setup - Videotec KEYPLUS Manuel D'instructions

Enabling input and output selection and keys

Each user can virtually select each of 16 inputs, and switch it on all 4 monitors. In order to avoid the use of passwords
and to limit, in the meantime, the selection of certain inputs or video outlets, it is necessary to define the set of
selectable inputs and outputs for each user by configuring the lists in Enabled par. menus.
If the set of inputs is not complete (a user has limited access to video inputs), disable Up/Down
keys for that user, which otherwise allow to recall the inputs without using the numeric keyboard.
Enabling inputs and outputs
Descriptions
From the main menu select the submenu Enabled
par.
Enabling selectable inputs
1) Enter Inputs menu
U D
2) / to select input number
E
3) to enable / to disable ;
Enabling selectable outputs
1) Enter Outputs menu
U D
2) / To select the outputs
E
to enable / to disable;
If some inputs are not selectable, disable up/down
function:
1) Enter Up/Down keys menu
E
2) to enable/disable up/down keys
C
3) save and exit

Password setup

KEYPLUS three-level password system is described in chapter KEYPLUS description, Security.
Changing passwords
Description
From the main menu select the submenu Pwd
change
1) Select the Connection password:
Type in the new Connection password (6 digits); when
required, retype it.
Save changes, when a prompt is displayed.
Possible messages displayed on the screen warn if
different values have been entered or if the password
has been set to 000000.
2) Select the Alarm reset password and proceed
as described above
3) Select the Setup password and proceed as
described above
C
to save and exit
C
to save and exit
Keys
D E
E
U D
E C
D E
U D
E C
D E
E
C
Keys
D E
E
0 9
[ / ]
1 0
/
Page 14
U D
function
Display
KEYBOARD MENU:
5.Enabled par. ¢
ENABLED PAR. 5.
Inputs £
ENABLED INPUTS
5.1 Input 1 : Yes £
ENABLED PAR. 5.
Outputs ¢
ENABLED OUTS 5.2
Output 1:Yes ¤£
ENABLED PAR. 5.
Up/Down keys ¡
ENABLED KEYS 5.3
Up/Down: Yes ¤
Display
KEYBOARD MENU
6.Pwd change ¢
PWD CHANGE: 6.
Connection £
CONNECT. PWD 6.1
[****..]
Save changes?
[1] Yes [0] No
PWD CHANGE: 6.
Reset allarme ¢
PWD CHANGE: 6.
Setup ¡
KEYPLUS9702