Setting The Time; Setting The Date; Setting The Display Backlight; Setting The Signal Beep - VOLTCRAFT IR 1201-50D Notice D'emploi

b) Setting the time
Select the "Time" function with "F1" or "F3". The selected function is highlighted with a bar.
Press "F2" to confirm your selection. In the next menu, set the time in the "hh:mm" time format. Change the hour
display with "F1" and "F3".
Press "F2" to continue to the minutes setting. Make the setting with "F1" and "F3". After setting, confirm the correct
time with "F2" (OK). The display returns to the main menu.
c) Setting the date
Select the "Date" function with "F1" or "F3". The selected function is highlighted with a bar.
Press "F2" to confirm your selection. In the next menu, set the date in the "Year:Month:Day" format. Change the year
with "F1" and "F3". Press "F2" to toggle to the next setting. Repeat the adjustment steps for the month and day. After
setting, confirm the correct date with "F2" (OK). The display returns to the main menu.
d) Setting the display backlight
Select the "Backlight" function with "F1" or "F3". The selected function is highlighted with a bar.
Press "F2" to confirm your selection. In the next menu, set the display backlight in 7 levels. The level is indicated by a
bar graph. Change the brightness with "F1" and "F3".
Confirm the setting with "F2" (OK). The display returns to the main menu.
e) Setting the signal beep
Select the "Buzzer" function with "F1" or "F3". The selected function is highlighted with a bar.
Press "F2" to confirm your selection. In the next menu, set the signal beep for the button tone and the alarm. Change
the selection for the button tone (Button) and the alarm (Alarm) with "F1" and "F3". Turn this function on and off with
"F2"; display shows "On" and "Off". Press the "MODE" button: The display returns to the main menu.
f) Setting the display contrast
Select the "Contrast" function with "F1" or "F3". The selected function is highlighted with a bar.
Press "F2" to confirm your selection. In the next menu, set the display contrast from 30 to 99 %. Change the contrast
with "F1" and "F3". Confirm the setting with "F2" (OK). The display returns to the main menu.
37