Maintenance And Cleaning; General Information; Cleaning The Lens; Cleaning The Housing - VOLTCRAFT IR-1600 CAM Notice D'emploi

Menu item "Logs"
Use the arrows to select the desired file and confirm this with the button "Enter". The chart is displayed with the first
measured temperature.
Use the arrows to control a cursor across the chart. The right arrow moves the cursor to the right, the left arrow
moves it to the left. The temperature value at the cursor is displayed at the bottom edge of the screen.
When the cursor reaches the screen edge, the chart is moved on accordingly.
The button "Esc" ends display and returns to the log file menu.

10. MAINTENANCE AND CLEANING

a) General information
The IR thermometer is maintenance-free apart from occasional cleaning and charging of the rechargeable battery.
Always close the safety cover (8) when the device is not in use.
Always observe the following safety information before cleaning the device.
b) Cleaning the lens
Remove loose particles with clean compressed air and wipe off any other deposits with a fine lens brush. Clean the
surface with a lens cleaning cloth or a clean, soft and lint-free cloth. To clean finger prints and other grease strains,
the cloth can be moistened with water or a lens cleaning fluid. Do not use any acid-, alcohol-containing or other
solvents and do not use any rough, linty cloth to clean the lens. Avoid excessive pressure when cleaning.
c) Cleaning the housing
Do not use any abrasive, chemical or aggressive cleaning media such as petrols, alcohols or similar for cleaning.
They will damage the surface of the device. Furthermore, the fumes are hazardous to your health and explosive.
Also do not use any sharp-edged tools, screwdrivers, metal brushes, etc. for cleaning.
Use a clean, lint-free, antistatic and slightly moist cleaning cloth to clean the device or the measuring lines.
If you have any technical questions about handling of the device, contact our technical support.
48