Operating Elements; Inserting The Batteries - VOLTCRAFT MS-575 Mode D'emploi

Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert
or at a qualified shop.
6.

oPErATinG ELEMEnTS

1. Meat / Up button (meat types / increase)
3. Cook / Down button (doneness level /
decrease)
5. Speaker
7. Doneness level indicator
9. Signal strength indicator
11. Meat type indicator
13. Temperature
15. Belt clip
17. ºC / ºF toggle switch
19. HI / LOW toggle switch (volume)
21. Lang button (language setting)
23. MIN button (minutes)
25. LED
27. Power button (on/off button)
29. Battery compartment
31. Temperature probe tip
7.

inSErTinG ThE BATTEriES

Receiver
The reset button (16), the ºC / ºF toggle switch (17) and the HI / LOW toggle switch (19) are
located under the receiver's battery cover.
1. The charging status warning (8) MAIN will be displayed on the monitor when the receiver's
batteries need replacement.
2. Open the receiver's battery compartment (18) by lifting the battery compartment lock (20) up and
lifting the battery cover off.
3. Insert two AA batteries, observing the correct polarity.
4. Close the battery compartment (18) again. Lift the battery compartment lock (20) up again.
Transmitter
The reset button (26) is located under the transmitter's battery cover.
20
2. Power button (on/off button)
4. Mode button
6. Language icons
8. Charging status warning MAIN / REMOTE
10. Timer icon
12. Target temperature
14. Timer
16. Reset button
18. Battery compartment
20. Battery compartment lock
22. HR button (hours)
24. Timer
26. Reset button
28. Connector for temperature probe cable
30. Temperature probe plug