Programming Instructions - Fracarro SIG7720 Instructions D'emploi

The SIG7720 module programming is carried out in 2 consecutive steps:
1. using the universal TPE programmer, to select mainly the network parameter (IP, NETMASK,
GATEWAY, etc) refer to the user's instructions of the universal programmer and the SIG7720 GEN-
ERAL MENU;
Freq. In 1204
Lev Out 15
FRACARRO
2. though the local connection between the module and PC. To carry out the local connection to
the module and enter all the configurations through the integrated web-browser interface, use a PC
with a network adapter (Ethernet card) and an Ethernet CAT-5E crossover cable – refer to the PRO-
GRAMMING INSTRUCTIONS – SIG7720 WEB MANAGEMENT PROCEDURE).

5. PROGRAMMING INSTRUCTIONS

PENTA85
SIG7901
01
HEAD
Line
PENTA85
FR
SIG7901
01
HEAD
Line
FR
SAT SAT
R R
L L
SIG7720
V SIG7720 V
SIG7720
HEAD-Line HEAD-Line
SIG7100 HEAD-Line
SIG7100
IP IP HEAD-Line
HEAD-Line
A A V
A A V
SIG7100 SIG7100
SIG7720
SAT SAT
R R
L L
SIG7720 SIG7720 SIG7720 SIG7720
V V
HEAD-Line HEAD-Line HEAD-Line HEAD-Line
SIG7100 SIG7100
HEAD-Line IP IP HEAD-Line IP IP
A A V A A V
SIG7100 SIG7100
PC
27
SIG7720
SIG7720
HEAD-Line
IP IP