Network Lan - Fracarro SIG7720 Instructions D'emploi

WARNING: when you select PRESET you will change Transport Stream Loop Through Selec-
tions parameters and to group activation. No variation is made to the IP settings and to the WEB
Server port.
When you select the FACTORY PRESET, in addition to the Transport Stream input parameters
you will also change the IP address and Multicast parameters of the streamer, but you won't lost
memories of presets.
6. CONNECTION OF THE SIG7720 MODULE TO THE LOCAL NETWORK
After programming, the module can be connected to the local LAN network by the CAT-5E patch cord.
01
HEAD
Line
IMPORTANT: the installation must be prepared and scaled to support a flow rate equal to at least
100Mbit/s; moreover, so as not to jam the available traffic, all the active devices that will make
up the network will have to be able to support MULTICASTING features. This verification will be
carried out by the administrator of the network where the encoder will be installed.
PENTA85
FR
CHVU4ZN
SIG7901
SIG7720
SAT
R
L
SIG7720
V
HEAD-Line
SIG7100
IP
HEAD-Line
A A V
SIG7100
40
SIG7904
SIG7720 SIG7720 SIG7720 SIG7720
HEAD-Line HEAD-Line HEAD-Line HEAD-Line
IP IP IP IP SIG7904 SIG7904 SIG7904 SIG7904
SIG7904
HEAD-Line HEAD-Line HEAD-Line HEAD-Line HEAD-Line

Network LAN

T
•
•
(N
u
s
It
t
W
k
w
c
T
in
It
•
•
S
a
In
1
2
3
IM
s
le
T
w