Sharp CD-BA3100H Mode D'emploi page 111

Enhancing Your System
The connection lead is not included. Purchase a commercially available lead as
shown below.
Red
White
„ Listening to the playback sounds from
VCR, DVD, etc.
1
To the line
output
2
sockets
3
White Red
4
Note:
To prevent hum interference, place this unit away from a television.
„ To record on a tape
RCA lead
1
(not supplied)
2
3
4
5
„ Headphones
z Before plugging in or unplugging the headphones, reduce the volume.
z Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
z Plugging in the headphones disconnects the speakers automatically. Adjust the
VCR, DVD, etc.
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
Press the ON/STAND-BY button to turn the power on.
Press the VIDEO/AUX button.
Play the connected equipment.
Insert a cassette in the TAPE 2 cassette compartment.
Press the VIDEO/AUX button.
Press the REC PAUSE ( ) button.
Press the / (TAPE 2 ) button.
Play the VCR, DVD, etc.
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
volume using the VOLUME control.
ENGLISH E-33