Renfert Twister Mode D'emploi page 29

Frequent intake filter blockage
is an indication of contaminated
compressed air. In such cases we
recommend the upstream instal-
lation of a filter pressure regulator
(see section „7. Accessories").
3.6 Changing the silencer
Twister venturi only
1. Unscrew and remove silencer
(Fig. 32).
2. Fit and screw in new silencer.
4. Spare Parts
Refer to the spares list at the end of this
manual for numbers of wearing and re-
placement parts.
5. Standard Delivery
1 Vacuum mixer
1 500 ml bowl, incl. blunger
1 Mains cable
1 Compressed air hose, 2 m
(Twister venturi only)
1 Pneumatic connection set
(Twister venturi only)
1 Operating instructions
1 Drill template
1 Fastening set
1 Repalcement sponge filter
6. Delivery Versions
1826-0000 Twister,
230 V, 50-60 Hz
1826-1000 Twister,
100-120 V, 50-60 Hz
1827-0000 Twister venturi,
230 V, 50-60 Hz
1827-1000 Twister venturi,
100-120 V, 50-60 Hz
7. Accessories
1821-0102 Stand for benchtop device
WxHxD: 227 x 622 x 294 mm
[8,937 x 24,488 x 11,575 inch]
1821-0200 Mixing spatula
1820-6500 Bowl incl. blunger, 65 ml
1820-6510 Blunger, 65 ml
1820-6520 Bowl, 65 ml
1820-0200 Bowl incl. blunger, 200 ml
1820-0210 Blunger, 200 ml
1820-0220 Bowl, 200 ml
1820-0500 Bowl incl. blunger, 500 ml
1820-0510 Blunger, 500 ml
1820-0520 Bowl, 500 ml
1820-0700 Bowl incl. blunger, 700 ml
1820-0710 Blunger, 700 ml
1820-0720 Bowl, 700 ml
1820-1001 Bowl incl. blunger, 1000 ml
1820-1010 Blunger, 1000 ml
1820-1020 Bowl, 1000 ml
1823-0500 Alginate Mixing bowl 500ml,
incl. paddle
2929-0000 Filter pressure regulator
- 7 - EN