Klarstein VARICOOK NEO Mode D'emploi page 26

EN
26
Function selection
Press the FUNCTION button to select one of the following functions:
Power > Temperature > Timer > Power-Timer > Temp-Timer.
Adjusting power (Power)
Left side (2000 W)
Press the FUNCTION button and select POWER. The display shows [1200] and the unit
operates at 1200 W. You can adjust performance using the arrow keys.
Right side (1500 W)
Press the FUNCTION button and select POWER. The display shows [1000] and the unit
operates at 1000 W. You can adjust performance using the arrow keys.
Setting the temperature (Temp)
Select the keep-warm mode (Temp) and press the FUNCTION button to set the
temperature. The temp indicator above the display lights up and the display shows
[240]. The device operates at 240°C. You can adjust the temperature with the arrow
keys.
Setting minimum and maximum power
Press the MAX button in any mode to set the highest power level.
In any mode, press the MIN button to set the lowest power level.
Key lock
Press MAX and MIN simultaneously to lock the buttons. The display shows [Loc]. Press
MAX and MIN simultaneously to unlock the buttons.
Note: Even when the keys are locked, the ON/OFF key is active so that the unit can
be switched off at any time.
After the operation
After cooking, the fan continues to run for 2 minutes to cool the appliance.
After 2 hours without operation, the unit switches off automatically.