Publicité
Les langues disponibles
Les langues disponibles
EN
42
programme and with your Micro you can use this control signal to expand
or compress the dynamic range (the difference between the loudest and
quietest sounds) of the reproduced audio signal. Changing the dynamic
range can affect the 'loudness' and/or 'quality of sound' of the programme
that you hear so that it will be more suited to your listening conditions and
your own personal listening requirements, e.g. in a noisy environment,
where quiet sounds might be swamped, setting the compression to
maximum will 'boost' the quiet sounds, whilst keeping the loudest sounds
at their original level..
There are 3 levels of compression:
•
DRC off: No compression. This is the default setting.
•
DRC low: Medium compression.
•
DRC high: Maximum compression.
1. Long press the Stop button on the Retro Turntable or press the MENU
button on remote control. Use the - Tune/ Skip + buttons to scroll to
DRC. Short press the
2. Use the - Tune/Skip + buttons to scroll through the options available and
short press the
button.
3. Short press the Stop button on the Retro Turntable or the MENU button
on remote control to exit from the Menu.
BT MODE
With your Retro turntable you can connect wirelessly to other compatible
BT devices and stream music, which can then be heard through the Retro
Turntable stereo speakers.
Before you can use your Retro Turntable in BT mode you need to 'pair' it
with a BT capable device, such as an iPod/iPhone/iPad/tablet/Android/
other phone/Computer.
1. If you are not already in BT mode, repeatedly short press the Source
button to go to BT mode (check the display).
2. 'bt' will be displayed and ''not connected'' will flash in the display whilst
your product searches for BT devices.
3. On the device that you would like to connect to your Turntable via BT
(e.g. iPod/iPhone/ iPad/Android/other phone/Tablet/Computer), turn on
BT connectivity and ensure that it is 'discoverable'.
Hinweis: Falls notwendig, lesen Sie sich den Abschnitt BT in der
Bedienungsanleitung des mobilen Endgeräts durch.
button.
Publicité
