Publicité
Les langues disponibles
Les langues disponibles
G
B
ACCESS TO THE OPERATOR MODES THROUGH THE LCD PROGRAMMER:
- Press the ENTER
key for 2 seconds. The active mode starts to flash.
- Press key A
to scroll through the modes.
- When the desired function is visible, wait 10 seconds.
- After 10 seconds the sign/icon of the desired mode will go from flashing to a fixed light.
NOTE: Only if you select the MANUAL MA or ALWAYS OPEN 5A modes, the mode sign/icon will flash slowly instead of being on with fixed light.
AUTOMATIC mode
AV
AP
Not in use
INTERNAL RADAR mode
RI
NIGHT mode
ni
MANUAL mode
MA
ALWAYS OPEN mode
5A
ALARMS
- AL-BA alternate signs/icons indicate discharged battery.
- AL-F5 alternate signs/icons indicate photocell breakdown (with photo test enabled).
- r5 sign/icon indicates a learning/realignment operation.
-
sign/icon indicates active external radar.
-
sign/icon indicates active external / internal radar.
Selection key A
Door accepts opening commands. Door closes once the "automatic closure" time has passed by.
Internal radar enabled. External radar disabled.
flashing = disabled
fixed = int/ext radar control disabled - opening only with OPEN command
flashing = enabled
(automatic mode), press key A . Giving a command, the display will show r5 during realignment.
To return to
Door opens. LCD display shows the
To return to
(automatic mode), press key A .
symbol flashing and does not accept any closure order.
KEYBOARD LOCKING
- Press and hold down keys A
- The sign/icon on the display flashes.
- Hold down until flashing stops.
KEYBOARD UNLOCKING
- Press and hold down keys A
- Release key A
and the ENTER
48
SIG
ENTER
and ENTER
at the same time.
and ENTER
at the same time.
key when the sign/icon on the display flashes
key
Publicité
