Electrical Installation; Technical Data - ABB ACS880-04 Manuel D'installation

2 Update notice

Electrical installation

CHANGED: Grounding system compatibility check
￭
The standard drive with no EMC filter and the ground-to-phase varistor connected can be
installed to a symmetrically grounded TN-S system. If you install the drive to another system,
you may need to disconnect the EMC filter and ground-to-phase varistor. See ACS880
frames R1 to R11 EMC filter and ground-to-phase varistor disconnecting instructions
(3AUA0000125152 [English]).
WARNING!
Do not install the drive with EMC filter options +E200 and +E202 to a system that
the filter is not suitable for. This can cause danger, or damage the drive.
WARNING! Do not install the drive with ground-to-phase varistor connected to a
system that the varistor is not suitable for. If you do, the varistor circuit can be
damaged.
Corner-grounded and midpoint-grounded 525...690 V delta systems
WARNING!
Do not install the drive on a 525...690 V corner-grounded or midpoint-grounded
delta system. Disconnecting the EMC filter and ground-to-phase varistor does not
prevent damage to the drive

Technical data

CHANGED: Ratings
￭
ACS880- Frame Input
04-... size current
U = 500 V
n
503A-5 R10
583A-5 R10
U = 690 V
n
430A-7 R10
522A-7 R11
650A-7 R11
721A-7 R11
IEC RATINGS
Nominal use
I I I
1 max max_start
A A A
505 560 671
585 730 828
430 540 720
522 685 910
650 825 1100
721 825 1100
Output ratings
Light-duty use
I P S I
2 n n
A kW kVA
503 355 436 483
583 400 505 573
430 400 514 420
522 500 624 505
650 630 777 630
721 710 862 705
Heavy-duty use
P I
Ld Ld Hd
A kW A
315 361
400 414
400 360***
500 455
630 571**
630 571**
P
Hd
kW
250
250
355
450
560
560