Nemaxx PW18 Manuel D'utilisation page 30

IMPORTANT!
If showing following words when you start the stove, such as:
It means temperature sensor 1 (exhaust gas temperature
sensor) is short-circuit.
It means temperature sensor 2 (safety temperature sensor
below the hopper) is short-circuit.
It means temperature sensor 3 (sensor for testing the
room temperature, which is located on the rear panel) is
short-circuit.
SAFETY
POWER FAILURE
After the power failure, the display will be show E7. If short power failure, you can do manually goes back to
"Stabilization" by Clear the E7 by "okay button", restarting the stove and then keeping pressing 3 second of
"fire button"
On power failure a small amount of smoke may be emitted. This does not last for more than three
to five minutes and does not represent a safety risk.
POWER INPUT SOCKET (contains the main fuse)
ELECTRIC EXCESS CURRENT SHUT OFF
The device is protected against excess current by a main fuse (on the rear of the device
The following is a list of main components and their functions
IGNITER
The STOVE comes equipped with an automatic igniter for lighting the fuel when the stove is in feeding and
lighting mode.
It means temperature sensor 1 is open-circuit.
It means temperature sensor 2 is open-circuit.
It means temperature sensor 3 is open-circuit.
[ EN ● 30 ]
Version: 2.0
KEN002PW18 25.11.2019
)