Nemaxx PW18 Manuel D'utilisation page 28

Version: 2.0
KEN002PW18 25.11.2019
By pressing , to select hours, then press to decide the hour ON or OFF.
On the above line it is showed the day, which is programming, the hour with the functioning state.
On the below line the programmed hour are displayed
● Lower one means off, taller on means on, which also shows on superior line
CLOCK SETTING
Press the key , the time can be amended:
You can select week or time by keys ,
also using to change the day or time, to save the correct data by press and move to next stage.
RESTORE DEFAULTS SELECT
Keeping pressing the key , it will appear the following words
By , you can choose Yes, Or No. 'Yes'- go back factory setting. 'No' - use the data you have changed.
IMPORTANT!
Pressing the key the programming will finish.
[ EN ● 28 ]