Publicité
Les langues disponibles
Les langues disponibles
Version: 2.0
KEN002PW18 25.11.2019
COMBUSTION FAN'S AND BLOWER'S SPEED SETTING
Pressing the
up to 2 seconds, on the display shows:
S = SMOKE (EXHAUST FAN) F = FAN (BLOWER)
By press to move from 'S 0' to 'F 0', by press to adjust the speed of them.
Both of them can be adjust from 20 to -20. Normally - Factory setting is 0. 20 is max. and -20 is min.
Press
to save the setting and go to P2, and P3, and P4, as following:
After P4, it is P5, this data is related to the exhaust fan's speed of the 'Cleaning' stage. The adjustable range is
also from 20 to -20
The following is P6; this data is related to the exhaust fan's speed of the 'Feeding', 'Lighting' and some minutes
of 'Stabilization' stage. The adjustable range is also from 20 to -20
CLEANING SETTING
You can adjust the time of cleaning during the operation "every X mins, last Y. Seconds" to cleaning the bur-
ning pot by the key
.
For example every 30 mins last 30 seconds
[ EN ● 26 ]
Publicité
